It has to have some sort of worm adjustment,maybe internally with shims. Really doesn't matter, it's junk, send it back!!!There’s only 1 adjustment on a Borgeson…I’m pretty sure about that. @fancyTBI would know.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It has to have some sort of worm adjustment,maybe internally with shims. Really doesn't matter, it's junk, send it back!!!There’s only 1 adjustment on a Borgeson…I’m pretty sure about that. @fancyTBI would know.
I could be wrong, but I seem to remember that in fancyTBI’s thread. But, I agree, send it back.It has to have some sort of worm adjustment,maybe internally with shims. Really doesn't matter, it's junk, send it back!!!
The factory units have two adjustments, the input shaft and the sector shaft. These Borgesons only have the sector shaft. I did try tightening up my factory unit's input shaft nut but it just had too much wear in it.Unlock the steering wheel and grab the steering shaft and rotate it while watching for the input shaft to move in and out of the box. If the worm adjustment is loose adjusting the sector will do you no good. It requires a big socket and a pin spanner to adjust the worm.