Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Gotcha. My bad, I missed that part and wasn't certain if it was a rotor/hub combo.
Maybe clean the hub bore and seal exterior with brake cleaner and apply a little bit of sealant of some type to help it stay in place instead of flop around on install, and also in hopes of preventing any grease from seeping? Not sure what I'd suggest, but maybe others can chime in whether it's a good idea or what product you might use.
Richard
Glad you figured it out, but!Well, I feel silly for not trying this before but the I-Beam seal is the correct seal for this even though I clearly have control arms and manual says independent suspension. Seals fit nice and snug now. Hopefully this will help someone in the future because whoever worked on it before me put the wrong seals too. Thanks everyone who chimed in.