2000 C2500 Project

[99xcss4]

it is kinda hard to see but if mine looks just like the on the suburban with one of the center bars lower one above the bumper with slight point huge push bar sections but it has the grate on the uper part like the one I put in post #47

 

[Sean Buick 76]

This one saved my 05 twice when I hit big deer going fast! Well worth the $ plus they make a solid place to mount a winch. I used a similar one on my 2012, I think it weighs about 300 pounds, had to use an engine hoist to hold it up while bolting it on.

 

[EJ_74]

This one saved my 05 twice when I hit big deer going fast! Well worth the $ plus they make a solid place to mount a winch. I used a similar one on my 2012, I think it weighs about 300 pounds, had to use an engine hoist to hold it up while bolting it on.

Did you have to change the springs for the additional weight?

 

[Sean Buick 76]

Did you have to change the springs for the additional weight?

No I didn’t change the suspension although I already had a 6” lift on both trucks.

 

[EJ_74]

Been talking to Black Bear about the tune and we decided to upgrade to the scan cable version to get more accurate results. Computer stuff is kind of confusing to me but hopefully if I follow the directions carefully it will work fine. Will probably do the first data log over the weekend

 

[Cadillacmak]

I like these bumpers. https://www.movebumpers.com/