What part part for a Delphi/Silverado?I have one here. Will need longer bolts and some spacers to clear the box.
I did one on my Dodge Ram and it's night and day different. Ram uses the same box as these.
New, remanufactured or…?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
What part part for a Delphi/Silverado?I have one here. Will need longer bolts and some spacers to clear the box.
I did one on my Dodge Ram and it's night and day different. Ram uses the same box as these.
It's from a 2013 Chevy C4500 cut away van - you can see that they have that little smiley on the box.What part part for a Delphi/Silverado?
New, remanufactured or…?
I finally got a used unit- hope it fits. My reading pointed me to: 2000-2005 Tahoe/Yukon Z71 box that is a heavier unit than the regular 1/2 tons with a 4 bolt input cover vs the three bolt cover, and a little different steering ratio. Anything newer than 2005 they changed the output spline count from 33 to 34...? If you wanted to reuse the oe pitman arm. I also got the three bolt to go with it.It's from a 2013 Chevy C4500 cut away van - you can see that they have that little smiley on the box.
You can find them both new and reman. from a variety of C and K trucks.
I am thinking I may go with all of this linkage, it's bigger and looks like less bump steer.