Canadian Rust Bucket
I'm Awesome
I was pulled away from the truck last Friday by a basement flood and emergency french drain install. So I haven't managed to get a finish coat on the doors yet.
But I did manage to get a few coats of body filler on the bedside. I use different colours of hardener between passes to help differentiate coats.
Also got my tailgate cleaned up and temporarily installed. I'll be sanding and priming the tailgate alongside the box, so most of the hardware has been left out.
This is the first time the truck has had a tailgate in about five years. Feels good!
Also took ten minutes and swapped my cloudy turn signal housings for some new ones. The old ones were well past their expiration date.
But I did manage to get a few coats of body filler on the bedside. I use different colours of hardener between passes to help differentiate coats.
You must be registered for see images attach
Also got my tailgate cleaned up and temporarily installed. I'll be sanding and priming the tailgate alongside the box, so most of the hardware has been left out.
You must be registered for see images attach
This is the first time the truck has had a tailgate in about five years. Feels good!
Also took ten minutes and swapped my cloudy turn signal housings for some new ones. The old ones were well past their expiration date.
You must be registered for see images attach
They're Taiwanese parts, but at least they're nice and clear.