Dentside_serria
Newbie
My 90 single cab short bed is finally where I want it to be cosmetically and it’s time to start giving the motor some attention.
I’m not trying to build a hot rod, if I were I’d carb swap and go nuts or 5.3 swap… just trying to not risk my life everytime I pull into traffic.
It’s a 1990 350 TBI
I’m going for a daily drivable 4x4 with a little extra juice then factory. I need to keep the TBI and can’t afford to go holy sniper.
I’m thinking mid length headers into 3inch single with high flow cat and flow master Super 10
Some vortec heads or somthing similar with a carb intake into a TBI adapter plate.
Some of my questions… does anyone have a link to some suitable heads that won’t break the bank.
Also what is a good tappet cam to run with a stock TBI system. I’m aware the TBI is the limiting factor but like I said, I’m not going for a high hp build, just as much as I can get out of it with the TBI. what are some cam specs to look for in a TBI cam
What is a link to a good cam you have run in TBI And what it required to make it run.
What is everything required for camming this motor as well as head swapping. Anything else I’m missing? How much HP should I expect out of a very mild build like this. I’m aware it won’t be a lot but I don’t want to do all this work If it only makes 240hp for example.
I’d love to hear what you guys have done for mild TBI builds, and everything it took, I’d love links to anything such as heads, cam, headers, etc…
Also I am running this through a getrag 5 speed.
Thanks!
I’m not trying to build a hot rod, if I were I’d carb swap and go nuts or 5.3 swap… just trying to not risk my life everytime I pull into traffic.
It’s a 1990 350 TBI
I’m going for a daily drivable 4x4 with a little extra juice then factory. I need to keep the TBI and can’t afford to go holy sniper.
I’m thinking mid length headers into 3inch single with high flow cat and flow master Super 10
Some vortec heads or somthing similar with a carb intake into a TBI adapter plate.
Some of my questions… does anyone have a link to some suitable heads that won’t break the bank.
Also what is a good tappet cam to run with a stock TBI system. I’m aware the TBI is the limiting factor but like I said, I’m not going for a high hp build, just as much as I can get out of it with the TBI. what are some cam specs to look for in a TBI cam
What is a link to a good cam you have run in TBI And what it required to make it run.
What is everything required for camming this motor as well as head swapping. Anything else I’m missing? How much HP should I expect out of a very mild build like this. I’m aware it won’t be a lot but I don’t want to do all this work If it only makes 240hp for example.
I’d love to hear what you guys have done for mild TBI builds, and everything it took, I’d love links to anything such as heads, cam, headers, etc…
Also I am running this through a getrag 5 speed.
Thanks!