alaraine
Newbie
I just spent the last hour and a half fabricating new exhaust hangers from 1/8 inch thick sheet metal. So at least that's one thing fixed.
Picture of one of the mounts mid way through. I rolled the edges to match the tail pipe contour and clamped it to the pipe with exhaust clamps since I don't know how to weld
Where it's notched is where it insets into the exhaust hanger bracket. I am lucky to have a very large shop to work in I'll post some pictures at some point
Took another look at the catalytic converter area I can't even find the wire for the 02 sensor I guess my uncle just decided to hack it out.
I checked my speedometer ground wire, it's good so either that's my cluster or speed sensor, going to try to replace the speed sensor later today, I got sick of working in the rain, gotta love Washington in the spring :eyeroll:
Picture of one of the mounts mid way through. I rolled the edges to match the tail pipe contour and clamped it to the pipe with exhaust clamps since I don't know how to weld
Where it's notched is where it insets into the exhaust hanger bracket. I am lucky to have a very large shop to work in I'll post some pictures at some point
You must be registered for see images attach
Took another look at the catalytic converter area I can't even find the wire for the 02 sensor I guess my uncle just decided to hack it out.
I checked my speedometer ground wire, it's good so either that's my cluster or speed sensor, going to try to replace the speed sensor later today, I got sick of working in the rain, gotta love Washington in the spring :eyeroll: