Wide control arms

[Land of chad]

Are there any control arms i can obtain for a nice front wide stance? Im going for a pre runner style look but i have no idea where to even find something like that. I have a 1993 gmc sierra c1500.

 

[Sean Buick 76]

89-98 GM C1500 2WD Builders Kit - LSK Suspension

LSK Is Proud To Introduce The 89-98 GM C1500 2wd Builders Kit. Our Builders Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rods And Double Shear Upper Control Arm Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited...

lsksuspension.com

 

[Land of chad]

89-98 GM C1500 2WD Builders Kit - LSK Suspension

LSK Is Proud To Introduce The 89-98 GM C1500 2wd Builders Kit. Our Builders Kit Uses A Set Of Custom Upper & Lower Control Arms, Fully Fabricated Spindle, Extended Heimed Tie Rods And Double Shear Upper Control Arm Mounts To Vastly Improve The On & Off Road Ride Quality. This Kit Is Best Suited...

lsksuspension.com

That looks like a great kit but i was thinking something a little more budget friendly like in the 500 ish dollar range

 

[95burban]

Best bet would be a pair of lift spindles and wheel spacers if you are on a tight budget

 

[Land of chad]

Best bet would be a pair of lift spindles and wheel spacers if you are on a tight budget

That is a good idea but im already lifted as much as i would like and i just really hate to run spacers tbh

 

[fancyTBI]

Get tires with a different offset and back spacing.

You aren’t giving us much info. What has been done to the truck lift wise?

 

[95burban]

Quality spacers are ok. I’ve used them in the past to space out the rear wheels on 4x4 GM trucks. I know a guy that’s been running them for years on a 3/4ton to make his wheels even with his flatbed and hauls heavy often. I wouldn’t think twice about running them in the front to add track width as long as they are good quality.