International47
Newbie
Agreed on many points.Rbob has no plans of doing EBL for the '7427. there was talk of it about 10 years ago, but it seems there is less and less interest for TBI. i don't think the juice is worth the squeeze to run EBL in tandem with a '7427. There are spreadsheets to automatically make VE tables if your wanting a self learn mode. also, you're going to need all the chip burning stuff if you want to change transmission.
I had "self learn" in quotations as it self populates the spread sheet/table, very similar to the method you need to tune either way.
At least for my purpose/application, I dont have the need or want to change any of the stock trans functions. shift points..etc.
so , right now, ebl seems a bit easier. Sadly the cost for either option is high, as im up here in Canada.