Suburban k2500 99 torsion bars key lift HELP!

[ali32109]

Hi,

I have GMC Suburban k2500 1999 7.4L, what i want only few inch's (1-3 inch) for bigger tiers, the issue is can't find torsion bars key for my truck that shipping UAE in good price, just want to ask if newer HD model 2001 to 2010 torsion bars key will fit.

i tried to ask one website and they told me this is link below will fit my car, but i can't trust.

2001-2010 Chevy/GMC Silverado Sierra 2500 3500 3" Front Lift Kit

TORCH 1"-3" Front Leveling Suspension Lift Kit for 2001-2010 Chevy GMC Silverado Sierra 2500 3500 HD 4x4 4WD. Kit includes adjustable torsion keys, a limited lifetime warranty, and dedicated customer support. Keys are indexed to adjust up to 3" of lift from the factory ride height without...

torchoffroad.com

So anyone can know which model are the same of GMC Suburban k2500 1999

like is all k2500 and k3500 are same?
is Silverado & Sierra same as Suburban?
is from 2001 to 2010 are same?

this point will help even to find it in local stores.

Thanks

 

[df2x4]

IMO, any torsion key lift is a complete waste of money. You can crank the stock keys farther than you ever should, and aftermarket keys won't solve any of the problems you'll create by doing so. You can crank the keys for an additional inch or two of lift at most, but any more than that and your CV angles will be terrible and you'll tear up front end parts.

 

[b454rat]

With a mild crank can fit a true 33, on an 8" wheel.

 

[Cadillacmak]

With a mild crank can fit a true 33, on an 8" wheel.

That is how I have mine set up, running 32ish tires. I did install high articulation CV axles too.

​

 

[Sean Buick 76]

The only good way to get a 3” lift is using a 4” suspension lift and relaxing the key tension.

 

[Cadillacmak]

The only good way to get a 3” lift is using a 4” suspension lift and relaxing the key tension.

I agree, going to Summit's website right now. And when the wife asks, I will say "Sean said I had too". That is a plan for the future of Erica (the 97 Suburban), just haven't found a kit I like yet.

 

[Sean Buick 76]

I agree, going to Summit's website right now. And when the wife asks, I will say "Sean said I had too". That is a plan for the future of Erica (the 97 Suburban), just haven't found a kit I like yet.

all good blame it on me

 

[KansasOBS]

I agree, going to Summit's website right now. And when the wife asks, I will say "Sean said I had too". That is a plan for the future of Erica (the 97 Suburban), just haven't found a kit I like yet.

RC 4-6, with https://www.realiftsuspension.com/shop

 

[Cadillacmak]

RC 4-6, with https://www.realiftsuspension.com/shop

Thank you Kansas!

 

[junkyardjack]

I did the torsion key crank on an s10 years ago to fit 31x10.5 and regretted it. Chewed up front end parts every 6 months. But a lot of fun to drive. There's always fender trimming