AboveTheLogic
Newbie
Mechanic friend of mine says I have it right ^
Will still check the manual when it arrives.
Will still check the manual when it arrives.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
"Lean" O2 sensor signal can be caused by misfire.I understand P0151 is a lean condition. Not likely corrected by the cap/rotor/plugs/wires I bought.
Do you have the wire harness adapters for the various engines?I also found all the J-39021 tester stuff on eBay for like, $145. So I ordered that.