1988 GMC C1500 - Z06 Package!

[FLGS400]

Good idea for the gauge mounting!

 

[PolarBear]

Good idea for the gauge mounting!

I'm very happy with how it turned out. Plus, in my mind, might as well group Transmission related stuff, together.

 

[PolarBear]

Time to assemble an LS6 this weekend!!!!

You must be registered for see images attach

 

[PolarBear]

Rebuilt most of this truck. Might as well rebuild the headlight assemblies, too.

You must be registered for see images attach

 

[PolarBear]

And then, there was an assembled LS6!

You must be registered for see images attach

You must be registered for see images attach

 

[PolarBear]

Man, this car intake makes this engine seem so small in a truck engine bay.

LS6 in!

You must be registered for see images attach

You must be registered for see images attach

 

[0xDEADBEEF]

Yeah, there's room for a Hi-Ram under there. Are you mounting the T-X in the cab? Curious where you are routing the harness through the firewall if so. Looks like maybe up through the floor?

 

[Supercharged111]

Hi-ram? Pfft. Go big or go home.

You must be registered for see images attach

Sky Ram FTW!

 

[0xDEADBEEF]

Hi-ram? Pfft. Go big or go home.

You must be registered for see images attach

Sky Ram FTW!

Who says LS can't make low-end torque?

xc_hide_links_from_guests_guests_error_hide_media

 

[PolarBear]

Yeah, there's room for a Hi-Ram under there. Are you mounting the T-X in the cab? Curious where you are routing the harness through the firewall if so. Looks like maybe up through the floor?

Terminator and MSD relay board are in the glovebox. The harness and aftermarket harnesses I've built, come though the firewall just below the factory TBI wiring pass through.

You must be registered for see images attach

You must be registered for see images attach