3/4 Ton of fun - ‘95 Sierra

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

fancyTBI

*Sad TBI 350 noises*
Supporting Member
Joined
Oct 7, 2018
Messages
3,325
Reaction score
9,480
Location
Northern IL

fancyTBI

*Sad TBI 350 noises*
Supporting Member
Joined
Oct 7, 2018
Messages
3,325
Reaction score
9,480
Location
Northern IL
So which LSD should I buy? A couple of the pieces stuck to the magnet on my 14SF.

You must be registered for see images attach


I was going to do axle seals today but I’m just going to put my new cover and gasket on. The seal on the driver side is weeping but not terribly. Passenger side is dry. Axle shafts have minimal lateral movement. I guess over the winter I’ll install a new carrier.
 

SNCTMPL

Supporting Member
Supporting Member
Joined
Oct 25, 2015
Messages
588
Reaction score
2,268
Location
Reno
So which LSD should I buy? A couple of the pieces stuck to the magnet on my 14SF.

You must be registered for see images attach


I was going to do axle seals today but I’m just going to put my new cover and gasket on. The seal on the driver side is weeping but not terribly. Passenger side is dry. Axle shafts have minimal lateral movement. I guess over the winter I’ll install a new carrier.
I would prefer the Detroit Trutrac, but I went with the Yukon posi because East Coast Gear sells them for half the price.
 

fancyTBI

*Sad TBI 350 noises*
Supporting Member
Joined
Oct 7, 2018
Messages
3,325
Reaction score
9,480
Location
Northern IL
I would prefer the Detroit Trutrac, but I went with the Yukon posi because East Coast Gear sells them for half the price.
I’ve heard good things about both. I’ll have to do some research into them but… yeah the Yukon is definitely more affordable. I do not plan on abusing my truck with burnouts or donuts. This will unfortunately be a job that I have to farm out over the winter.

Who knows how long that stuff has been there really. I’ve cleaned the case out as best as I could and see no other obvious signs of damage.
 
Top