evilunclegrimace
Does not always play well with others
Lets have a little fun, I am in the process of freshening up a 90,000 mile engine to install in the '92 that had a broken crank and then the replacement engine developed a coolant leak in the #2 cylinder wall.I am hoping that the 3rd time is a charm.
So I am replacing all of the bearings in the "new" block a did not pay attention to the cam bearing oil hole position, and when I went to the FSM there is not a procedure listed for cam bearing replacement. SO why not You tube? What a CF!, ten guys with ten different technics and the same for manufacturers they all have a different procedure.
What say the forum( this should be fun). I found my answer by dissasembling a factory block, let the fun begin.
So I am replacing all of the bearings in the "new" block a did not pay attention to the cam bearing oil hole position, and when I went to the FSM there is not a procedure listed for cam bearing replacement. SO why not You tube? What a CF!, ten guys with ten different technics and the same for manufacturers they all have a different procedure.
What say the forum( this should be fun). I found my answer by dissasembling a factory block, let the fun begin.