-
-
Kkatwood16 replied to the thread No compression.No I am not this will be my first leak down test.
-
Kkatwood16 replied to the thread No compression.Also do the valve need to be set before performing a compression test as to allow the engine to draw air?
-
KI was informed this would help with details when asking questions about my truck, so I'm going to do a build overview. The truck is a...
-
Kkatwood16 replied to the thread No compression.Do I need to have a starter motor connected in order to do the compression test or can I turn the engine by hand?
-
Kkatwood16 replied to the thread Cylinder Compression.With the valves all the way backed off, the plugs only in 1 and 8, and my ear to the throttle and exhaust manifold, I can hear air...
-
Kkatwood16 replied to the thread No compression.See I know that I I had the valves too tight initially when I went to install the distributor, but last night I took a bore scope to the...
-
Kkatwood16 replied to the thread Cylinder Compression.Thanks for letting me know I will compile a thread from beginning to end to provide more context. This is my first Forum I have joined...
-
Kkatwood16 replied to the thread No compression.Update I have not gotten my compression tester yet but I removed the plugs in the good cylinders and put a plug in 1 and 8 and spun it...
-
Kkatwood16 replied to the thread Cylinder Compression.I was thinking the same so I backed my valves off and check with no plug in and the thing is still piss poor on both those cylinders. I...
-
Kkatwood16 replied to the thread No compression.I was thinking the same thing with the timing being off would cause all cylinders to have issues. Thank you for your input.
-
Kkatwood16 replied to the thread No compression.My other reason to believe it's not timing is I can watch as I line my harmonic balancer mark up that the exhaust valve is open meaing...
-
Kkatwood16 replied to the thread Cylinder Compression.This is what makes me believe it's not timing after spinning it around like 10 full rotation the best I get out of 1 and 8 is like...
-
Kkatwood16 replied to the thread No compression.I was not hoping for compression to change while installing the other plugs I was simply trying to hear air escape better bc the other...
-
Kkatwood16 replied to the thread No compression.I started the second thread bc nobody answered me till 2 am on the other
-
Kkatwood16 replied to the thread No compression.Sorry I was very unclear about things I was trying to keep things brief. The engine is currently on a stand, and no I have no proper...
-
-
Loading…
-
Loading…
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- Orpedcrow
- Hoffmankid
- gonza191
- yevgenievich
- Tballew27
- Minn95Dually
- v8wxd
- GrimsterGMC
- FLGS400
- bigcreepo
- Obslow
- FLYWHEEL_PRIME
- El Tigre
- iBlameADHD
- FrankieD61
- movietvet
- Alteca
- Fwbarre
- FighterOfTheFoo
- ODaily
- 99xcss4
- Blazer92
- docstoy
- Rocket Surgeon
- Deancr11
- rzr6-4
- 5344L
- Supercharged111
- PCMusicGuy
- jftaylor17
- 96hoe504
- Laredo
- Noobular
- Shawtbed96
- Dravec
- chrismeyer78
- SNCTMPL
- NYNightsat21
- dadams
- fancyTBI
- kennythewelder
- 89GMCJOHN
- Aarondash
- Caman96
- hatfield198
- KiloMikeZ71
- Charlesteneows
- Saren42