Devils Cut
Newbie
Hello, is there a way to access transmission temp in a 1995 K2500 via the PCM/TCM? Would like to monitor temp, but don't want to cut a cooler line just for a sensor. Any other options? Thank you.
Transmission temperature data source?
- Thread starter Devils Cut
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Should be able to read transmission temp with a scanner that has that option.
Devils Cut
Newbie
Sorry, should have specified a signal for a gauge. ODB1 is useless.
Get a sensor and gauge, install the sensor in the side of the trans or weld a bung in the pan, wire it up you're good to go
My 93 reads transmission temp fine on the scanner? But yeah, if you mean the sensor could be goofy, I'd believe that....
Similar threads
Members online
- 99xcss4
- Stormbringer
- Remodelmaster
- fancyTBI
- Outl4wAndy
- L31MaxExpress
- shablagoo_gabagool
- termite
- marcgyver77
- Charlesteneows
- Badcraig
- Ak101guy2024
- SNCTMPL
- Cole82295
- DeuceRooster
- Gibbsc16
- maddux1037
- alvaroemg
- AboveTheLogic
- DOUBLEOH9
- 1Elm1
- Merlo111
- Caman96
- PlayingWithTBI
- ZeroX063
- cruzin4002
- jus10inbrla
- dice
- Griffin
- 0xDEADBEEF
- kur4o
- Torchred
- AmericanPatriot100
- elevatorman
- BuiltToWork
- boy&hisdogs
- Orpedcrow
- chstrumpetdude
- OutlawDrifter
- movietvet
- sowardcustoms
- Seymorey