Engine died while running down the road. Thought it was front tank out of gas again, back tank not transferring. It has gas, added 5 gallons to be sure. Have bled Schrader valve and it sprays gas everywhere on prime.
O2 sensor change fixed my other sensor issue. Was planning to post updates to my other threads on this truck this evening, but here we are stuck again.
Will not hit a lick, P0336 comes back after clearing code. We were going about 70 in fifth gear and the engine died.
Coasted to a stop on an off ramp, figured the back tank had quit and the front tank was empty. Added five gallons to the front tank. It ran for a minute and died while we were closing the back of the truck.
Has not started since. Fuel sprays out of the Schrader when pressed, prime is working.
Should have kept the loaner fuel pressure gage.
Here is what I'm thinking.
Make sure front tank is good by adding another 5 gallons.
Check fuel pressure.
If those are okay, crank position sensor?
Any advice greatly appreciated.
O2 sensor change fixed my other sensor issue. Was planning to post updates to my other threads on this truck this evening, but here we are stuck again.
Will not hit a lick, P0336 comes back after clearing code. We were going about 70 in fifth gear and the engine died.
Coasted to a stop on an off ramp, figured the back tank had quit and the front tank was empty. Added five gallons to the front tank. It ran for a minute and died while we were closing the back of the truck.
Has not started since. Fuel sprays out of the Schrader when pressed, prime is working.
Should have kept the loaner fuel pressure gage.
Here is what I'm thinking.
Make sure front tank is good by adding another 5 gallons.
Check fuel pressure.
If those are okay, crank position sensor?
Any advice greatly appreciated.