hilly101111111
Newbie
Goodmonring everyone, hope all is well.
So I have a 1990 GMC k2500 350/turbo400 trans. I need some thoughts on this one !
Once in a while I will drive the truck for 20-60 min get to my destination and then come back out within say 10 min and try to start the truck and I get a no crack no start. If I let the truck sit like 20 min it'll start right up no issue. It seems like this happens in the heat. Now I replaced the following in the last year, starter, ground straps, battery cables, battery, Neutral safety switch, basically everything with ignition and starting the engine is new except the ignition switch itself which I have one. the other thing it won't let me do is when I get the no start no crack is it won't let me jump the starter with the solenoid. I suppose I could have a bad solenoid. Its really strange.
So I have a 1990 GMC k2500 350/turbo400 trans. I need some thoughts on this one !
Once in a while I will drive the truck for 20-60 min get to my destination and then come back out within say 10 min and try to start the truck and I get a no crack no start. If I let the truck sit like 20 min it'll start right up no issue. It seems like this happens in the heat. Now I replaced the following in the last year, starter, ground straps, battery cables, battery, Neutral safety switch, basically everything with ignition and starting the engine is new except the ignition switch itself which I have one. the other thing it won't let me do is when I get the no start no crack is it won't let me jump the starter with the solenoid. I suppose I could have a bad solenoid. Its really strange.