My first dually build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JEFF995

Newbie
Joined
May 2, 2024
Messages
6
Reaction score
19
Location
moore oklahoma
I have been searching for a dually that checked all my wants and after 10 yrs found one . The last owner had it 23 yrs and this thing runs great shifts great . The plans this year are drop it 5/8 and then bag it next year . I am doing a djm front with beltech street performance shocks, new upper and lower control arms . I already had the rear fully c notched and had bags installed by Garret T tricked toys in Oklahoma he does the best work in town , that way next year just have to do the 4 link . Here are the current pics should have the front finshed this weekend .
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Last edited:

Drunkcanuk

I'm Awesome
Joined
Jul 22, 2021
Messages
2,983
Reaction score
8,620
Location
Alberta, Canada
How long have you had the front lowered?
It will take a while and some miles to get the springs to settle.
Mine, a 91 RCSB with 4/6 sat a bit nose high, but is starting to settle down a bit now that I'm getting a bit of driving done.

And I'm sure you know the right thing is lower the front more!!!! Lol
 

Jimmy D

I'm Awesome
Joined
Jan 22, 2022
Messages
248
Reaction score
653
Location
Ark
How long have you had the front lowered?
It will take a while and some miles to get the springs to settle.
Mine, a 91 RCSB with 4/6 sat a bit nose high, but is starting to settle down a bit now that I'm getting a bit of driving done.

And I'm sure you know the right thing is lower the front more!!!! Lol
Maybe cut 1/2 a coil off the fronts for approximately a 1" drop?
 

Drunkcanuk

I'm Awesome
Joined
Jul 22, 2021
Messages
2,983
Reaction score
8,620
Location
Alberta, Canada
Maybe cut 1/2 a coil off the fronts for approximately a 1" drop?
I'd give it a bit of driving time to see how much it settles, get a few hundred miles and see how it settles before tearing into it again.
Take some measurements.

But it's your truck. Just my personal experience.
 
Top