I would watch this video if it was made.Maybe I'll get my extra pins put in and grounded and do a relearn for you to see you what it actually looks like and how the truck responds.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I would watch this video if it was made.Maybe I'll get my extra pins put in and grounded and do a relearn for you to see you what it actually looks like and how the truck responds.
I've got an OBDXPro Vt tool and use PCM Hammer or LSDroid to read/write and TunerproRT or Universal patcher to modify the files. I wanted to learn on some nitty gritty stuff first, but I have a HPTuners bundle in the mail right now for my 2011 Suburban and other stuff that I couldn't tune with the free stuff.Awesome yeah I'm in Newberg, not too far from you.
I'm going to give another crack at this disabling the range selector code - I already tuned out PRNDL and have a wire I can use to ground the two pins set up....
Let me see how this next attempt goes and maybe I'll hit you up. I have full house HP Tuners, what freeware are you using?
I remember now we had to do that for your truck.Go into the table for programmed DTCs and unselect the range sensor box, try again maybe? I'm fairly certain there's a discussion in either the 454 thread or the thread for my truck that addresses the problem directly?
Let's be clear for the boys and girls at home.... You did this with a tech 2 handheld scanner, correct?I completed my 0411 swap today. I couldn’t get the relearn to work until I selected 2002 8.1 as the powertrain option relearn was successful on first attempt. No other issues or DTCs.