So the seal on my compressor decided to blow it guts out on my 95 2500. Any tips on getting the accumulator nuts loose? I cannot get them to break loose. All i have managed to do is bend the line coming out from the evaporator. I do need to replace the lines that bolt to the comp due to one of them rubbing on the battery tray. So the line on the front i can just cut to aid in removal of everything. I don't really want to have to replace the evap unless its the last ditch effort. I don't see why these lines are so tight with the relatively low pressure this system runs. The units I work on at work run higher pressures and are not this tight. Any tips would be grateful.