3/4 Ton of fun - ‘95 Sierra

[fancyTBI]

I also want to add helper bags to this for next year. I think my C notch will be a limiting factor. Most of the kits I see bolt to the Belltech notch. I assume moving the brackets further from the axle is less ideal.

The red area is what I think is the ideal
Spot. The blue area would not interfere with the notch but is too far back. I suppose I could modify the bracket and bolt it in place on the notch, still. I am able to get behind there with a wrench.

You must be registered for see images attach

I want to use this truck as a 3/4 ton. I will pull with my K2500 if I have to but man the ride with this would be great.

 

[Orpedcrow]

Do they make some that go above the axle inside the notch? Like in place of a bump stop

 

[618 Syndicate]

Air Springs For Lowered Trucks | Air Lift Company

Air Lift Company provides SlamAir air springs for lowered trucks and vehicles to increase suspension travel and load capacity.

www.airliftcompany.com

Says for 1/2 ton trucks, but has 2k lbs capacity.
I pull a 18' car trailer with this setup on my cateye.

 

[618 Syndicate]

Do they make some that go above the axle inside the notch? Like in place of a bump stop

There wouldn't be enough room for travel.

 

[fancyTBI]

Air Springs For Lowered Trucks | Air Lift Company

Air Lift Company provides SlamAir air springs for lowered trucks and vehicles to increase suspension travel and load capacity.

www.airliftcompany.com

Says for 1/2 ton trucks, but has 2k lbs capacity.
I pull a 18' car trailer with this setup on my cateye.

I saw those. I like them. I think I saw a kit on their website too.

 

[618 Syndicate]

I saw those. I like them. I think I saw a kit on their website too.

Buy that and the onboard compressor kit.

 

[fancyTBI]

Buy that and the onboard compressor kit.

Heard that. Definitely don’t want to use shop air for something like that. And at that point I better just get train horns.

 

[618 Syndicate]

I better just get train horns.

You won't...

 

[fancyTBI]

You won't...

I must.

 

[fancyTBI]

I said I want poly and GD I got it. What a fight these were to get in. I might need a taller bump stop but we will see. Easy enough to change. Now I will get the ballpoint out and install my TTX. Then the uppers.

You must be registered for see images attach