1991 Cheyenne restomod

[whitewheels]

Difficult exhaust. Got it pretty much where I wanted it but then after thepipes got warm the tip got missalign....

You must be registered for see images attach

 

[GrimsterGMC]

Difficult exhaust. Got it pretty much where I wanted it but then after thepipes got warm the tip got missalign....

You must be registered for see images attach

The steel pipes will expand quite a bit when hot, have you considered a short piece of flexi pipe just before the tip and hard mounting the tip so it won't move?

 

[whitewheels]

The steel pipes will expand quite a bit when hot, have you considered a short piece of flexi pipe just before the tip and hard mounting the tip so it won't move?

That sound like a good idea. Thanks

 

[whitewheels]

You must be registered for see images attach

Got the truck trough tec yesterday so now it's Street legal

I have two problems I'm scratching my head on.
I have a slight missfire when cold or cold-ish, when fully warmed theres no missfire.
The night before tec I hooked up my gauge to the tranny checking pressures. Same as 10years ago, low through the range but just within spec. Spilled some oil doing that so decided to check my fluid level. Bone dry. Filled 1qt ,no oil on the stick. Well had no more oil so thats a problem after tec. But after filling 1qt it got real harch putting it in od, no other gear.....and it wont shift pass 1st gear?? Had a new clean funnel and new oil