Search results

  1. blueburban87

    When to upgrade from CS130 to AD244

    Howdy gang, This post will just be my experience and what worked best in my application. You may be looking for something similar or already made the swap :) did you ever sort out your voltage issues... I did, and ran a CS130 to AD244. Best upgrade in an old truck especially if your going to...
  2. blueburban87

    Fuel tank pressure build up??

    Not a bad idea. I was about to just remove all the lines and add a fuel filter to the vent line in the back of the tank to manage pressure and vapors. I may look into what you did first
  3. blueburban87

    Fuel tank pressure build up??

    I have the purge solenoid removed from the engine builder. I can replace the canister, issue will be pulling clean air in that the purge solenoid would have done. Any ideas?
  4. blueburban87

    Fuel tank pressure build up??

    I appreciate the feedback. My setup is the crate engine with Holley efi, there is no valve hookup from the factory tbi hooked to the ecu pulling vapors into the throttle body to burn. So the vapor filled the canister making it useless but no factory purge to mange it. I was going to put a vented...
  5. blueburban87

    Fuel tank pressure build up??

    if i cannot find a cap to vent( not likely) i assume the investigative work to see whats causing the system not to vent is what has to be done and will for sure need to replace the canister?
  6. blueburban87

    Fuel tank pressure build up??

    all really good points. What i can tell you is it has a Warbro intank pump to work with the sniper. The engine did not come in the truck it was a Crate Blueprint, Its been in the vehicle since 2021. Even when the tank is low when i remove the gas cap the sounds of pressure release. I think your...
  7. blueburban87

    Sniper Efi Gen1 Question

    I know this is an old post, if you dont have this already here is your electronic trans controller plug in https://www.summitracing.com/parts/sne-551-101
  8. blueburban87

    Fuel tank pressure build up??

    Hello, I'm hoping someone has experienced this before. I'm running a Blueprint vortec engine in my 87 suburban with holley EFI setup. Just today I smelt this sweet tea smell chemical smell in the cab. I had my local shop look at it with me and as I popped the hood and cranked the engine fuel...
  9. blueburban87

    Running A/C with Holley EFI

    I figured out how to wire the AC kick for guys that had the 350 TBI trucks and added a sniper or engine swap with Sniper and factory AC. This also works if you added Electric fans. Are you still looking to answer where does the Pin A orange input wire from the 10 pin connector go to activate AC...

Latest posts

Staff online

Members online

... and 9 more.
Total: 1,516 (members: 59, guests: 1,457)

Forum statistics

Threads
66,808
Messages
1,435,204
Members
56,734
Latest member
King

Share this page

Top