weird-o-CLAY
Newbie
hello,
I need help
Ima use broken English so forgive me.
I have a 95 gmc sierra sl, I bought this truck 2 years ago and the ac worked. After sitting up to rebuild the trans the ac stopped. I opened the condenser and it was full of shaving so cleaned and blew it out and added a new orfice tube, new evaporator and drier. I’ve cleaned the high s d low lines out and the compressor and yes it still kicks on and works as should, I replaced all o-rings and filled the system with 11oz of pag150 with uv die to detect leaks. I’ve replaced the blower motor resistor and now setting 1-5 works again. The blower motor works as should on all settings and there wasn’t any trash when I replaced the evaporator. I vacuumed the system for about a hour until it read -30 on high and low side, then let it set for a hour and no changed in pressure showing no leaks. I filled the system with 32oz of r134a but it still blows hot. The heat works when I switch it to heat and the actuator door do rotates and seems to open and close the blend door. I noticed while adding Freon the low side never got cold, I also put a new switch on the drier when I replaced it. ANY SUGGESTIONS?
I need help
Ima use broken English so forgive me.
I have a 95 gmc sierra sl, I bought this truck 2 years ago and the ac worked. After sitting up to rebuild the trans the ac stopped. I opened the condenser and it was full of shaving so cleaned and blew it out and added a new orfice tube, new evaporator and drier. I’ve cleaned the high s d low lines out and the compressor and yes it still kicks on and works as should, I replaced all o-rings and filled the system with 11oz of pag150 with uv die to detect leaks. I’ve replaced the blower motor resistor and now setting 1-5 works again. The blower motor works as should on all settings and there wasn’t any trash when I replaced the evaporator. I vacuumed the system for about a hour until it read -30 on high and low side, then let it set for a hour and no changed in pressure showing no leaks. I filled the system with 32oz of r134a but it still blows hot. The heat works when I switch it to heat and the actuator door do rotates and seems to open and close the blend door. I noticed while adding Freon the low side never got cold, I also put a new switch on the drier when I replaced it. ANY SUGGESTIONS?