daniel17319
Newbie
I have the wiring harness purchased, taking out diesel harness, do I need a gasoline fuel tank to send info to the computer, my computer has been reprogrammed for it as well.
Thanks guys
Thanks guys
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You should document your whole build on here, I have been thinking about the same thing. There are several nice crew cab long bed one tons around here for $1000 to $1500 with dead 6.5's that would be nice to gas swap. I am sure others would enjoy it also.I have the wiring harness purchased, taking out diesel harness, do I need a gasoline fuel tank to send info to the computer, my computer has been reprogrammed for it as well.
Thanks guys
Thanks for the input, I forgot to include one piece of informationyou will need more then just the engine harness you the rear harness that goes from the fire wall to the fuel pump and connects to the tail light harness and maybe a under dash/cab harness if you clean the fuil tank out good you might not need to change it you will need a gas gauge cluster as well
the harness that goes from the fire wall that has the taillight harness in it has the the wires for the fuel pump and the fuel gauge in it they are not same between the gas and diesel the gas has 2 more wires in int to make the fuel pump workThere is no data producing device in the fuel tank, so I'd say no on that. The fuel level goes straight to the gauge and I don't know what powers the fuel pump from a stock harness but safety shutoff features aside, it's just switched +12v on a relay.