Adding Cruise Control 1996 C1500 ?
- Thread starter name
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'd be looking for a Treasure Yard '96, and grab the parts as needed.
I'm thinking the Cruise module and cable, wire harness, and the proper multifunction switch/turn signal lever. Gotta get the right combination of cruise control and wiper delay, and given the problems with the wire harness attached to that switch, you should probably get that part "new". But I've never looked at a '96. I'm making the assumption that it's similar to my '88 K1500 5.7L, and it may not be.
Since the "turn signal lever" also controls the wiper delay, you may want to upgrade the wiper system if you don't already have the delay style.
I'm thinking the Cruise module and cable, wire harness, and the proper multifunction switch/turn signal lever. Gotta get the right combination of cruise control and wiper delay, and given the problems with the wire harness attached to that switch, you should probably get that part "new". But I've never looked at a '96. I'm making the assumption that it's similar to my '88 K1500 5.7L, and it may not be.
Since the "turn signal lever" also controls the wiper delay, you may want to upgrade the wiper system if you don't already have the delay style.
It is a W/T 1500, I didn't even think to look for a Cruise Control when I bought the truck because I am just so use to them coming with it .
You must be registered for see images attach
You must be registered for see images attach
If that is all I have to do to this '96 then I can handle it myself, But if I had to source a new computer and wiring harness I would just go without .
Here is what the engine bay looks like on my truck, it is the 4.3L. Do any of you guys have any pictures of your 4.3's so I can see how the unit is mounted and the cables are ran ?
You must be registered for see images attach
I , it , why would they have not have cruise when it's hot everything else? That's .nuts...
Well , I'd get out the service manual look through cruise wire diagram and routing see if its there just taped up. If not then decide next step.
Well , I'd get out the service manual look through cruise wire diagram and routing see if its there just taped up. If not then decide next step.
If you're still looking for part numbers, check Nemiga. The site is kind of a pain to navigate, but a great resource.
https://nemigaparts.com/cat_spares/epc/chevrolet/
Similar threads
Staff online
-
df2x44L60E Destroyer
Members online
- Rainey01
- PlayingWithTBI
- termite
- DamHoodlum
- Harry Dawg
- Derek_sum
- cj97
- Caman96
- fancyTBI
- Ks2006
- Seymorey
- PercheCreek98
- Sean Buick 76
- L31MaxExpress
- elijahf
- movietvet
- Charlesteneows
- slowfivespeed
- Reega
- Zkull13
- Bobby D
- 919c2500
- df2x4
- Leeztruk
- Vikingdude
- sntrym
- Griffin
- shaneroze
- BeXtreme
- Drunkcanuk
- attilamolnar
- OBS_Alex
- craftycup
- OutlawDrifter
- Goodtin
- Nessa-92Blazer
- 90gmcsierraL59
- Cole82295
- jbphelps76
- floresoscar42
- beatlebob32
- djshott
- Komet
- 99xcss4
- MonicoR
- bluex
- DerekTheGreat
- jdpilot-01
- SuperStepside
- N3yK0n