chevman_88
Newbie
Just finished replacing my entire HVAC system (this was a bear went through several variations of every part and every connection was seized), reinstalled the dash and checking everything out before recharging the AC (holding vacuum perfectly). It seems I lost dome and map lights when I open the door or use the light switch to manually turn them on. My door lights and under dash lights still work as they should. If I use the map light buttons they still work, so I know it's not the bulb and it is getting power.
I've read quite a few posts talking about this circuit, but most times it's all the interior lights and the only one I found similar they just spliced in new grounds. Any ideas? Where does the white ground for the ceiling lights split off from the dash/door lights? Wiring schematics I've found have been less than helpful.
I've read quite a few posts talking about this circuit, but most times it's all the interior lights and the only one I found similar they just spliced in new grounds. Any ideas? Where does the white ground for the ceiling lights split off from the dash/door lights? Wiring schematics I've found have been less than helpful.