toyomudder
Newbie
I have an issue with my truck and it seems the only way I can fix the issue is with a deleted transmission pcm. Either that or if you all could let me know how to trick any scanner into doing a crank sensor relearn for my 1998 chevrolet truck. My issue is I do NOT have a 4l60 transmission in my truck anymore. After the 7th time of replacing the transmission I had had enough and went ahead and swapped a nv4500 out of a 1994 chevrolet c10 and ran everything to make the cruise control, reverse lights, and clutch pedal work properly. The only issue is about 3 months after I finally got around to disposing of that ****** automatic my crank sensor went out, and now I need the relearn so I can get rid of the annoying misfire and check engine light. But when you go and do tbe relearn in ANY scanner it needs the transmission to be in park and emergency brake on AND A/C OFF. And all it will do is kick me out saying my trans is not in park. because it can't read that it's in park. The wiring says the neutral safety switch is pink from the fuse panel and light green to the tail light the problem is it wont tell the pcm that the transmission is in park. I have tried just about all I can and I have even tried getting a new pcm but all these places all they want to do is send you one that is flashed to your same vin# not something custom. I mean is it really that hard? They can do all of this raising the top speed and Rev limiter to the new updates.... why not flash the computer and tell me which wire to hook to and be done! Sorry for the frustration guys it seems to be getting more and more of a pain to do anything anymore with all these regulations!