jus10inbrla
I'm Awesome
Ok. 93 k1500. Courtesy lights. So i know what makes them work. However i hit a snag when i tried wiring in the k2xx puddle light to them . Whenever i wire the light to courtesy pos or neg, (without door being open or headlight switch dimmer rolled up) the puddle light comes on. In all of my troubleshooting here are my findings. All of this done with truck off / keys out of ignition. Kicker is ALL COURTESY LIGHTING IS WORKING PROPERLY but. There is ghost voltage triggerin the puddle light to come on. I even ran temporary jumper wires in case i had a possible short; but ohming out confirmed no shorts. I also took a video of findingds. Question is ; is there supposed to be voltage while courtesy off ? Can the puddle lights only work as reverse lights in the k2xx mirrrors?
Courtesy ON via dimmer switch OR door plunger (got same reading)
Courtesy pos to neg - 11.47v
Courtest pos to body ground - 11.48v
Courtes neg to body ground - 0.03v
COURTESY OFF
courtesy neg to body ground 6.6v
Courtesy pos to body ground 11.47v
Ohm
Courtesy pos to courtesy neg open
Body grnd to courtesy pos open
Body grnd to courtesy neg close 30.4k
Courtesy ON via dimmer switch OR door plunger (got same reading)
Courtesy pos to neg - 11.47v
Courtest pos to body ground - 11.48v
Courtes neg to body ground - 0.03v
COURTESY OFF
courtesy neg to body ground 6.6v
Courtesy pos to body ground 11.47v
Ohm
Courtesy pos to courtesy neg open
Body grnd to courtesy pos open
Body grnd to courtesy neg close 30.4k