treynol4
Newbie
Purchased a used 5.7 TBI motor and transmission from a guy who said motor and tranny had aboug 25000 miles but job was done about 12-13 years ago. pretty clean setup but after taking exahust manifold off looked valves looked a little rusty. Can i spray these down with pb blaster or should i leave them be? Motor was from North Carolina but fluids were all defnitely pretty dirty. Motor turns and seems to have decent compression.
Also looking for a detailed emissions diagram for pcv -egr etc.
Thank you
Also looking for a detailed emissions diagram for pcv -egr etc.
Thank you