Looking for a very mild 2" to 4" suspension for a K3500 Crew SRW.

[Proper Historics]

Hi. I'm looking to build suspension to accommodate a 295/70/18 or 37.5" x 12" tire.

I'll be running an ARB bull bar at the front, so clearance will be improved.

Ideally, I'm looking for something that will enhance the ride, if possible. I'm open to custom work too, but don't really if there's a "go to" for this type of thing.

Thanks for the advice!

 

[Proper Historics]

Also, worth noting that I'm wanting to run custom, 8" x 18" steel wheels.

 

[Sean Buick 76]

I would look at a BDS 6” lift and with the t bars loosened up it’s an easy 4” lift with good geometry.

 

[Proper Historics]

I would look at a BDS 6” lift and with the t bars loosened up it’s an easy 4” lift with good geometry.

They don't seem to make a kit for the 3500, only the 2500...

 

[b454rat]

I have a brand new in the box(es) Superlift 5-7" IFS lift kit. Fits 88-up 8 lug trucks. I have it in the for sale section.

 

[Proper Historics]

I have a brand new in the box(es) Superlift 5-7" IFS lift kit. Fits 88-up 8 lug trucks. I have it in the for sale section.

That's probably a bit more than I'm looking for. I'm running 255/85-16's without any lift.

i'm hoping with the new bumper and 3" to 4", I can easily run 35's, possible 37's.

 

[99xcss4]

https://www.roughcountry.com/produc...find=1994-chevy-c2500-k2500-pickup-4wd-735105 I think this is the way to go I do not think you will fit 37s on a 4'' suspension lift and if you do it will need triming/cuting and maybe a body lift as well

 

[b454rat]

Really don’t think ur gonna fit 37s with that low a lift. I had a truck that was SAS’d years ago, I had 6-7” of lift and rubbed skinny 38s. Gonna havta move tire forward to keep from rubbing the backside of the fender. Or run cutouts…..

 

[boy&hisdogs]

I have 37s on a 6" lift and I still had to trim some sheet metal.