Can’t find the hazard flasher connection anywhere under my dash. 99 Tahoe

[BushidoSuave]

I can’t seem to find the wire to plug the new resistor into under my dash. I installed LEDs for my taillights and turn signals, but I’m trying to fix the hyper flash by installing new resistors under the dash. I changed the one for the turn signals right behind the handbrake, but I can’t seem to find the one for the hazards. I watched a couple of videos and the place they say to find it at has nothing in my truck. The only 2 things I could find in that part of the dash are 2 connectors. A teal one that I’m not familiar with the function of, and the other one which controls the resistor for the daytime driving lights. Not sure if GM may have changed the hazard resistor location on my year but any advice or information would be very helpful. Pictures attached

 

[GoToGuy]

Have looked in the owners handbook or do you the OE service manuals?

 

[GoToGuy]

It should be on the firewall, above your toes.

You must be registered for see images attach

 

[Nad_Yvalhosert]

The one in my '00 Yukon is in the power distribution node by my left foot, on the inside firewall, near the parking brake.

 

[PM18S4]

Hazards flashers for 99 Suburban, Yukon, Tahoe were in the Convenience Center. Located in the driver-side cabin footwell in the upper left.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

OEM Part and interchange numbers:
GM 11516051, Standard Motor EFL6, TRIDON / NOVITA EP29, WVE 1R2190