These little F’ers?Problem is there are 3 little tabs on the plastic and when they grab they are not coming out!
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
These little F’ers?Problem is there are 3 little tabs on the plastic and when they grab they are not coming out!
Are you supposed to depress those tabs to remove?Them things are a pain. When you do get them out, get a nylon pipe cleaner and your preferred solvent (acetone, mineral spirits etc…) and clean those bores real good. It makes installation and out-stallation easier.
Curious, when you first removed the original poppet style, did you have the same issue removing them?Yes those are the SOBs! The tabs are tiny and way in there in a groove! I used a shop vac to suck any plastic pieces out. Tiny screw driver slowly prying until can grab with needle nose. I have some long wooden Qtip cotton tip applicators form work I use ot clean it out.
That was my question, thanks.the old motor the poppets came out easily
I don’t think so, they are just really tight and there is a kind of groove they sit in. I used one of those needle nose pliers that has the tips bent in a circle like spark plug boot pliers to pull mine out. Gentle twisting helped walk them out.Are you supposed to depress those tabs to remove?