I was leaning towards buying the 20 mm obs spacers through Cunningham to run nbs rear discs , seems a more efficient way to do things , plus it leaves the option for quality rear caliper upgrades down the line .
Or spend a little bit more on parting it together using the 82 ‘ Eldorado calipers and pad swap and 95 impala rotors along with the machined swap bracket offered , but limited to single piston calipers at that point.
If I go pull all the nbs rear brake components from a donor 00-06 what option do I have easiest to make 5lug rotors out of the factory 6lug ~ Re-drill I assume is standard and ok to do …or is there a 5x5 rotor offered for the 10 bolt nbs trucks aftermarket?
Or spend a little bit more on parting it together using the 82 ‘ Eldorado calipers and pad swap and 95 impala rotors along with the machined swap bracket offered , but limited to single piston calipers at that point.
If I go pull all the nbs rear brake components from a donor 00-06 what option do I have easiest to make 5lug rotors out of the factory 6lug ~ Re-drill I assume is standard and ok to do …or is there a 5x5 rotor offered for the 10 bolt nbs trucks aftermarket?
Last edited: