Transfer case rear seal part nr?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dan_gearhead

Newbie
Joined
May 27, 2024
Messages
4
Reaction score
6
Location
Sweden
The rear seal on my 1989 k2500 350 is leaking...just wanted to check if someone has the part nr because I am having a hard time finding the correct one here in Sweden...thanks.
You must be registered for see images attach
 

Dan_gearhead

Newbie
Joined
May 27, 2024
Messages
4
Reaction score
6
Location
Sweden
Yeah, you replaced the seal...but I don't think that was your leak. Leaks tend to flow downhill, and rearward. If that seal was leaking, the driveshaft would be slimy.

Look farther forward. That's where the slime is.
I see what you mean but it has stopped leaking now so it was the seal.
 

Laredo

I'm Awesome
Joined
Apr 25, 2023
Messages
256
Reaction score
927
Location
Arizona
For the record, there is no gasket between the transfer case half and the output shaft housing. It's sealed with RTV silicone or other suitable sealant.
 
Top