93 C1500 Wipers not working

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cbcoleman03

Newbie
Joined
Nov 2, 2023
Messages
5
Reaction score
3
Location
Tennessee
My windshield wipers have stopped working. Sometimes (not always) if you turn the wiper switch they will move about half of a swipe and freeze, but they usually won't even do that. I replaced the wiper motor, nothing. The fuse is good. I do not hear any buzzing like some others have stated. My washer fluid still works. I'm assuming its the switch but any help at all is greatly appreciated.
 

Drunkcanuk

I'm Awesome
Joined
Jul 22, 2021
Messages
2,982
Reaction score
8,618
Location
Alberta, Canada
My windshield wipers have stopped working. Sometimes (not always) if you turn the wiper switch they will move about half of a swipe and freeze, but they usually won't even do that. I replaced the wiper motor, nothing. The fuse is good. I do not hear any buzzing like some others have stated. My washer fluid still works. I'm assuming its the switch but any help at all is greatly appreciated.
It's a well known issue with the control board for them. I believe it's some cold solder joints that break, usually an easy fix. Been a while since I read up on it.
Use the search function at the top of the page, should yield some threads about it.
 

cbcoleman03

Newbie
Joined
Nov 2, 2023
Messages
5
Reaction score
3
Location
Tennessee
It's a well known issue with the control board for them. I believe it's some cold solder joints that break, usually an easy fix. Been a while since I read up on it.
Use the search function at the top of the page, should yield some threads about it.
The new wiper motor I put on had a new pulse board in it. When i tried the wipers after installing it they moved a couple inches and stopped just like before.
 

tpass

I'm Awesome
Joined
Apr 8, 2021
Messages
293
Reaction score
493
Location
Mass
believe it or not, I had an issue on my 1993 wipers intermittently stopping/starting or not working at all. I thought for sure the stalk was bad.

But I had found that after a motor swap, I had not attached the headlight harness ground on the radiator support. Once I reattached that ground all was good again.

check your grounds on the engine bay harness.

Also check for binding in the linkage.
 
Top