OutlawDrifter
Long Roof K2500 Driver
...western NE, i.e. the capital of BFE.
I think WY and ND have western NE beat...but not by much
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
...western NE, i.e. the capital of BFE.
I think WY and ND have western NE beat...but not by much
You cant add a Jeep shaft that has an extra U-joint up by the brake master cylinder but you can take your stock shaft and take the old rag-joint off and slip on a U-joint.
FLAMING RIVER MOD COMPLETE
Deleted the rag joint today. Pretty straight forward, operates smooth. Deleted the plastic shroud, we will see if the snow and ice build up around the joint, may have to figure out some protection for it.www.gmt400.com
Also... This one has the u-joint to buy in it... “joint 1”DD x 3/4”-30”
Rag Joint Eliminator for 96+?
has anyone with a 98 done the flaming river mod the more research i do the more i question myself this person says it will work the next says it will bind i want to know if someone deffinitly knows it works or not Ive done the flaming river mod. Huge difference, no more steering slop, no...www.gmt400.com
I'm going to be helping my nephew move from Chicago to Grants Pass in a couple of weeks and I'm considering going through ND instead of WY. I've done that I80 so many times. It is either nothing or corn FOREVER!Been a while since I've been through WY but I do remember it being brutally boring as well. ND is kinda neat, you can watch your dog run away for a week!
Ahh, so a joint isn't added, it's merely moved. That makes more sense. So the puck would work with a Jeep shaft on a late truck then.
Maybe in Theory, but I still wouldn't run that puck, there's nothing to catch it if it fails. The factory rubber has a steel cage to keep the two halves connected if/when the rubber fails
Hey there's cows out here too lolIt is either nothing or corn FOREVER!