Can you post a picture?Its coming out of the intake right next to where the distributor plugs into the top of the motor.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Can you post a picture?Its coming out of the intake right next to where the distributor plugs into the top of the motor.
"Relatively thin cover"? The stamped-sheetmetal covers are thin. The 4WD covers are cast aluminum, and fairly heavy-duty.whats with the braces going to the torque converter cover? Doesnt seem like they would do much just going to that relatively thin cover? And they are a pain in the ass.
Sensor on back of engine coming off a 90 degree fitting, oil pressure?
Truck is 94' Yukon, TBI.
it s/b a 3-wire sensor on a 94. One is for the gauge and 2 are for the Fuel Pump Relay bypass.
THAT should be the 3-wire oil pressure sending unit/fuel pump relay bypass as described above.Not the ICM, im well aware of that damn thing.
Its coming out of the intake right next to where the distributor plugs into the top of the motor.
I put my ~300K mounts right back in, 'cause I couldn't find anything I trusted. That was about five years ago. I expect things are even worse now.I came across a thread on here talking about motor mounts, did you ever find quality replacement motor mounts Schurkey? The ones ive found locally dont inspire confidence.