Hello good afternoon thanks to the help of some people i have been considering getting aluminum heads for my build i was wondering if these specific heads would work.I’ll leave the head specs below the link aswell also i believe the intake wouldn’t work with the heads but if there is one that will work and bolt up i will buy it.
JEGS 514067: Small Block Chevy Aluminum Cylinder Head for use w/Hydraulic Flat Tappet Cam [205 cc Intake Ports, Straight Spark Plug Style] - JEGS
Get the Best Performance with JEGS Small Block Chevy Aluminum Cylinder Head for use w/Hydraulic Flat Tappet Cam [205 cc Intake Ports, Straight Spark Plug Style] 514067 parts at JEGS. Shop Now at the Guaranteed Lowest Price!
www.jegs.com
- For Hydraulic Flat Tappet Camshaft with 0.535 in. Maximum Valve Lift
- 78 cc Exhaust Port
- 23-Degree Valve Angle
- Guide Plates
- Rocker Arm Studs: 3/8 in.
- Intake Port Location: Stock
- Intake Port Dimensions: 2.200 in. x 1.200 in.
- Exhaust Port Location: Stock
- Exhaust Port Dimensions: 1.356 in. x 1.420 in.
- Drilled for Standard and Vortec Intake Manifold
- Valve Cover Bolt Pattern: Dual Pattern (Perimeter and Center Bolt)
- Valve Seats Machined: Yes
- Valve Seat Machine Style: 3-Angle
- Valve Seat Material: Hardened Ductile Iron
- Valve Spring Pocked Diameter: 1.580 in. O.D. (1.600 in. O.D. Max Machining)
- Intake and Exhaust Valve Material: Stainless Steel
- Intake Valve Head Diameter: 2.020 in.
- Intake Valve Stem Diameter: 0.3415 in.
- Intake Valve Length: 5.115 in.
- Exhaust Valve Head Diameter: 1.600 in.
- Exhaust Valve Stem Diameter: 0.3415 in.
- Exhaust Valve Length: 5.115 in.
- Valve Locks: 7-degree
- Valve Retainers: Chromoly
- Intake Valve Guide Material: Manganese Bronze
- Exhaust Valve Guide Material = Phosphor Bronze
- Valve Guides: 1/2 in. O.D.
- Valve Guide Length: 1.950 in.
- Valve Guide Clearance: .0014 in. - .002 in. (with .3415 in. diameter valve stem)
- Drilled for Accessory Holes and Steam Holes
- Spark Plug Dimensions: 14 mm x 0.750 in. with Gasket Seat