dirtautoguy
I'm Awesome
- Joined
- Jul 22, 2015
- Messages
- 256
- Reaction score
- 140
What’s everyone getting for heater temperatures? Yesterday on my way to work I noticed my heater didn’t seem as hot as it used to be (I usually have to turn it down or off before I get to work). It was warm for sure but not hot like it normally is. I measured the temps of the vents with a infrared sensor and got about 143f.
I have checked and the temperature does change with the dial so I think the blend doors are working. My engine temps were all normal. Water pump, radiator, radiator cap, thermostat are all fairly new.
Yesterday it was about 13f on my way to work and this morning it’s -3f and I had about the same result. It’s warm enough to be warm but it used to be that you about couldn’t stand It and would have to turn it off it would get the cab so hot.
I guess mostly im just wondering if there is a spec or general temp range I should see out of the vents before I go to crazy with this.
1996 rcsb 5.7
I have checked and the temperature does change with the dial so I think the blend doors are working. My engine temps were all normal. Water pump, radiator, radiator cap, thermostat are all fairly new.
Yesterday it was about 13f on my way to work and this morning it’s -3f and I had about the same result. It’s warm enough to be warm but it used to be that you about couldn’t stand It and would have to turn it off it would get the cab so hot.
I guess mostly im just wondering if there is a spec or general temp range I should see out of the vents before I go to crazy with this.
1996 rcsb 5.7
Last edited: