TheRedMamba
Latest activity Postings About
-
-
Reset the minimum idle screw, but it isn't as easy as just setting it. You have to calibrate the IAC. In fact, you probably have to... -
Fuel pressure as well as base timing is what I'd check first, and then I'd check that the timing is advancing when the bypass connector...
-
TheRedMamba reacted to Road Trip's post in the thread Rough running, stalling, check engine light, and can't pull codes. with
Like.
Greetings sdryluth, belated Welcome to the GMT400 forum! I know I'm late to this thread, but first of all thanks for coming back and... -
Remember, you can always report a PM as spam, if that's what you think it is. Once it's in a report, we can take farther action. Thanks...
-
I have received a few PMs from a few different members, saying that, someone has PMed them, about something they were trying to sale to...
-
MELLING all the Way
-
WHAT ENGINE??? Melling is my go-to, and the M99HV-S is very recommended for small-blocks. I suppose it'd fit a V-6 also, but I've...
-
Melling M99HVS is the only pump I will put in any SBC I build. It is cheaper than a Melling select. The newer OE replacement Melling...
-
Melling.
-
TheRedMamba reacted to PlayingWithTBI's post in the thread 1988 350 tbi Rough Idle When Warm with Like.
Here's a procedure that talks about the IAC and the TPS. It's old but is still informative.
-
TheRedMamba reacted to dallasp438's post in the thread Cooling System Upgrade/Replacement with Like.
The electric pusher fan as far as I knew was 7.4L equipped but It's possible that after 98 GM added it to more trucks. A lot of people...
-
TheRedMamba reacted to L31MaxExpress's post in the thread Cooling System Upgrade/Replacement with Like.
Tahoes definitely had them, my PCM was programmed with the correct values to run it and it had the factory wiring and relay to run it. I...
-
TheRedMamba reacted to L31MaxExpress's post in the thread Cooling System Upgrade/Replacement with Like.
IIRC the TBI trucks also had several different fan clutches used like the Vortecs. In the Vortec era, the non-ac trucks had a 6" clutch...
-
TheRedMamba reacted to L31MaxExpress's post in the thread Cooling System Upgrade/Replacement with Like.
GM definitely used a dual core in some applications. My 99 Tahoe had one in it. 34" x 17" x 2.25" core. Sucker was fairly expensive to...
-
TheRedMamba reacted to dallasp438's post in the thread Cooling System Upgrade/Replacement with Like.
The widest factory rad. that was in it from the factory is considered HD cooling so congrats on having the HD factory cooling Camen96...
-
-
Loading…
-
Loading…
