Tbi supercharger?

[Kyle89]

Other than a custom chip for my 92 and a walbro pump and bigger injectors what kit is there to run 8psi on my bone stock 350? It has 9.0 c/r I would like to push 10 till it decides to go bang so I have an excuse to change the motor lol. Does anyone know of any kitsch that I can bolt on and change the belt and run it? My fiance told me no new engine till this one blows up.so I I was told the vortech v3 Kitsap for carburetor setups will work with my tbi but I can only find ones with 5 psi

 

[L31MaxExpress]

Other than a custom chip for my 92 and a walbro pump and bigger injectors what kit is there to run 8psi on my bone stock 350? It has 9.0 c/r I would like to push 10 till it decides to go bang so I have an excuse to change the motor lol. Does anyone know of any kitsch that I can bolt on and change the belt and run it? My fiance told me no new engine till this one blows up.so I I was told the vortech v3 Kitsap for carburetor setups will work with my tbi but I can only find ones with 5 psi

I had a Weiand 177 on my TBI 350 in my G20 van for about a year back in 2006. I smoked two well built 700r4s and two 4L60Es in that time. Weiand 177 with the out of the box belt ratio gave 10 psi @ 5,000 rpm and 12 psi @ 5,500. Used a 454 TBI unit with a 4:1 rising FMU (50 psi fuel pressure @ 12 psi boost) and the EBL computer to control the fueling. Stock TBI 350 with the 177, a LT4 cam and tri-y thorley headers made about 375 hp @ 5,000 and about 450 ft/lbs @ 3,000 rpm

 

[Kyle89]

S

I had a Weiand 177 on my TBI 350 in my G20 van for about a year back in 2006. I smoked two well built 700r4s and two 4L60Es in that time. Weiand 177 with the out of the box belt ratio gave 10 psi @ 5,000 rpm and 12 psi @ 5,500. Used a 454 TBI unit with a 4:1 rising FMU (50 psi fuel pressure @ 12 psi boost) and the EBL computer to control the fueling. Stock TBI 350 with the 177, a LT4 cam and tri-y thorley headers made about 375 hp @ 5,000 and about 450 ft/lbs @ 3,000 rpm

Pounds like a good setup but I want more of a procharger setup I looked at the wynjammer kits for tbi. I dont think he's any longer in business though

 

[Kyle89]

https://www.jegs.com/i/Vortech/933/...xSMtSu-wLTSvhXpBG8YJThLjEm0OtCrxoCbzwQAvD_BwE

 

[Kyle89]

Would that work? 5 to 6 psi kinda low I want a setup like that one but 10 psi

 

[df2x4]

You're going to dump a ton of money and time into hardware that you're not going to be able to take with you to a newer engine platform if you go this route. Not smart IMO.

 

[Kyle89]

True I was going to let my fiance use my left overs but I got to teach her how to drive something more than a 4 banger lol

 

[skylark]

All you need is to drain the oil out and put a brick on the throttle pedal. Order your new engine while your current one does the death rattle.