Recent content by bluex

  1. bluex

    3/4 Ton of fun - ‘95 Sierra

    Looking closer at this an the "after" measurements, do you like how the truck currently drives? I imagine it probably has a slight pull though. I don't remember seeing but did you remove the knockouts from the upper arms? On a lowered truck you can throw the stock alignment specs out the window...
  2. bluex

    1999 C3500 CC DRW Build

    Daily driving it this weekend, brakes still doing good, ride doesn't seem to have changed with the helpers, seats are awesome, ac is working in typical gmt400 fashion of keep it on max all the time lol.
  3. bluex

    3/4 Ton of fun - ‘95 Sierra

    Toe an go is all most places want to do anymore. Most new cars are only adjustable on toe from the factory. I finally found a shop again that will take the time an do it right bit it runs $140 an he's almost an hour away. Worth it though for getting what you want/pay for.
  4. bluex

    3/4 Ton of fun - ‘95 Sierra

    Parking brake is also based off the inital setup of the shoes though, so if they are too far out adjusting the PB cable won't really help regular pedal feel. Setting my shoes tighter helped pedal feel an made the parking brake better since they were farther out already. I think it was another...
  5. bluex

    1999 C3500 CC DRW Build

    Doubt it, I'll probably just convert the lighter plugs to USB. It already has USB under the lid but I believe they just were for the radio.
  6. bluex

    1999 C3500 CC DRW Build

    *K200 these are from a 2016 double cab
  7. bluex

    1999 C3500 CC DRW Build

    My guess is they were just to far out to work properly? I set them up mostly how the manual said but I probably didn't run them out far enough to start with to center them an then back off. I haven't driven it yet but I did back up a bunch trying to get them to adjust last week. All that is new...
  8. bluex

    1999 C3500 CC DRW Build

    I'm going to like this I think.... AC charged up an working good. Gotta finish up these seats an I can take it for a drive, probably wait till tomorrow when it's not raining...
  9. bluex

    Free to me GMC 2500

    800s have a proportion valve before the abs unit under the master with some nice braided stainless lines to it. I'd grab all that from your donor too. Ditch the abs all together an enjoy....
  10. bluex

    Free to me GMC 2500

    Good grief, how about yall let the guy build HIS truck however he wants :rolleyes:
  11. bluex

    3/4 Ton of fun - ‘95 Sierra

    Should be a plug you can remove, or a slug that needs knocked out of no one ever did it.
  12. bluex

    3/4 Ton of fun - ‘95 Sierra

    I doubt my abs or master was bad now. The proportion valve is supposed to build pressure in the rear first then send it to the front while also not locking the rears. So if they don't figure it out, I'd try blocking the rear an see if you get a good pedal. I guess the combo valve on the side of...
  13. bluex

    1999 C3500 CC DRW Build

    Got it feeling much better today. I decided to test the master by clamping the rear hose off. After about 3 pumps of the pedal it was awesome and very firm feeling, couldnt get it pushed close to the floor. Remove the clamp an back to spongy an to the floor almost immediately. So I tore the...
  14. bluex

    3/4 Ton of fun - ‘95 Sierra

    That's not it. Been doing some reading here an other places this week. Clamped off my rear line an after a few pumps I had an awesome pedal. Tore the rear back apart, ran the shoes out till I could hear them slighty drag an it's pretty decent now. Not squarebody level, but definitely better...
  15. bluex

    Like to LS coil packs on 2000 C3500 7.4 vortec engine with stock computer? Is it possible?

    Pretty sure you'll have to 411 swap it for the CNP ignition
See more

Latest posts

Members online

Total: 503 (members: 14, guests: 489)

Forum statistics

Threads
64,756
Messages
1,400,012
Members
52,379
Latest member
fregosox7

Share this page

Top