Recent content by A97obs

  1. A

    20x9s -24 need tire help for front fitment on 5/7 drop

    It’s not necessarily a lot of wheel it’s just a lot of tire and to much tire for that Drop .. that why I suspect I could have ran a common 20” lo-pro tire and did a less extensive drop like a 3-4” front I’m gonna just run the stock 15s it will be a better ride..over all I’ll invest in 15x7...
  2. A

    20x9s -24 need tire help for front fitment on 5/7 drop

    This is test fit (PHOTOS) at Stock ride height up front ! The wheel clears full steer on the bumper side on the 33” tires The full left steer rubs at inner fender (point) midway! The 33s are going away ! But this is just for a visual idea to gather assumptions or certainty on the best tire...
  3. A

    20x9s -24 need tire help for front fitment on 5/7 drop

    Front Tire sizing question for the crowds who have done 20x9 5” drop or 4” drop specifically up front . I’ can’t really determine what to assume will work for a tire or what to go with safely. Not buying returning guessing etc it’s to much to deal with $$ mounting dismounting etc … I’ have...
  4. A

    '97 Steering Gearbox Replacement Guidance

    That’s good to know ! Im about to make this next project a new 12:7:1 box . That’s odd after 2 years your getting play hmm??? Think for the money spent it would be a premium build Yielding at least 10 yrs of proper functioning. Kinda worries me but still going for it . I had wondered , I...
  5. A

    '97 Steering Gearbox Replacement Guidance

    They’re all relatively the same design with the U-joint shafts. Cunningham just is the go to for a lot of new products for the 88-98s . They ship fast and their products work !
  6. A

    LEDs, Resistors, Flashers - Should I just give up?

    I figured it out needed ballasts
  7. A

    Are Tubular upper lower arms available (stock height) for 2wd 88-98

    I had also thought I saw lower arms somewhere that did away with the press in style ball joints .. might be wrong on that
  8. A

    Are Tubular upper lower arms available (stock height) for 2wd 88-98

    Because my bushings are worn .. and I’ve invested a ton in the suspension if I was to do new and if they were available I would do the tubular just to do it …
  9. A

    Are Tubular upper lower arms available (stock height) for 2wd 88-98

    I haven’t been able to find out if there are any vendors out there that offer Stock tubular upper and lower arms (no lift) (no drop) stock height eBay google just might be over looking For 2wd 88-98 Upper and lowers A tubular lower that still accepts a coil spring not a coilover setup
  10. A

    '97 Steering Gearbox Replacement Guidance

    But how much of that is Say so” or believable .. I mean we don’t know what they see. Any company can use anything as a say so situation to avoid having to pay out core costs. As a consumer you gotta just say ok I agree or fight about it. Same goes for trans repair business .. we just never know...
  11. A

    '97 Steering Gearbox Replacement Guidance

    I only said that because they have offered many a solid working box In terms of being hassle free working like they should… outside of the core refund issue .. which i agree is not cool.. Borgeson isn’t always mentioned much on Here as much like you’d think they would be..so I mean I...
  12. A

    '97 Steering Gearbox Replacement Guidance

    Go redhead even if you don’t get your core refund .. it’s our best bet offered out there for these trucks … and the 96 ps pump swap you won’t regret The evo is junk ! Good luck on your build
  13. A

    '97 Steering Gearbox Replacement Guidance

    The best bet at this point is to just invest 1000% in the best of the best Redhead box / Cunningham solid U-joint steering shaft / mevotech Ttx tie rods / moog pitman and idler arm and definitely opt for a 96’ year model Ps pump and 96’ year pressure hose and by pass all the evo junk if you...
  14. A

    '97 Steering Gearbox Replacement Guidance

    Does this general rule of avoiding the 12:7:1 quick steer box apply the same to 5/7 drop 1/2 ton trucks .. or at that point does it not matter . I do know that redhead mentioned on a call that the 12:7:1 is not recommended for lifted trucks. I am in the next stage of adding a new blue or...
  15. A

    Stuck with Solid blinkers once I added New led corner markers ?

    I use a Ibrightstar brand on everything so far so good
See more

Latest posts

Staff online

Members online

... and 29 more.
Total: 1,893 (members: 79, guests: 1,814)

Forum statistics

Threads
64,601
Messages
1,397,203
Members
52,066
Latest member
BootyBandit

Share this page

Top