-
-
They are heim joints on the bottom and the top has a fully threaded bolt and some jam nuts. The bolt can be backed out 2-3 inches... -
Try to take the bracket off the stock line and use it. I had to adjust the location of that bracket on my stock replacement lines. You...
-
It’s not nearly as classy as your truck but I used a hose clamp for my brake line.
-
We're still rolling... New pads, calipers, and steel braided brake lines. I have most of the linkage tight, cotter pins in place. I...
-
Welcome from Florida! 1990 SBSC step with 4/6 drop. McGaughy 2" drop spindles and MAXTRAC 2" drop springs in front. Front fender lips...
-
There’s tons of them on FB. Someone was posting as a Las Vegas, Nevada based parts dealer. All the photos they had were from the Midwest...
-
95OBSMan replied to the thread OBS parts dealer?.Thanks guys, hadn't been on FB for awhile and was just checking to see if anyone had bought from them. Will not deal with FB stuff, I"ll...
-
No telling...that truck is a weird one. Don't see too many Silverado crew cabs, and I figured the 5.7 would be less common than the 6.5...
-
95OBSMan replied to the thread What did you do to your street truck today?.Replaced Pitman arm & idler arm w/bracket.
-
-
Anybody done business with a FB business called OBS (Chevy obs parts) Its the one with the brown bucket seats, thanks for any info!
-
-
Well....."we" decided that taking the spacer out at this time would not be the best. Going to let it settle down a bit. Rolling it out...
-
I wanted to post a big shout out to @evilunclegrimace for the parts he sent me. Specifically the interior parts from the tan 97...
-
Stopped in to the new Auto Zone that opened in our little town for the first time to get some tire cleaner for my daily, and parked next...
-
-
Loading…
-
Loading…
