Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
So are the Bank1 and Bank2 Sensor 1's alternating up and down or are they staying at .7vdc? Both sensor 1's need to be alternating between roughly .1 vdc and .9 vdc. The voltage will climb and drop steadily between those two numbers.Hello again
I received the necessary information yesterday
O2 voltage
B1S1 0.7
B1S2 0.1
B2S1 0.7
B2S2 0.6
I checked more than once and it seems to be fine, thank you.Arr spark plug wires routed correctly and are they separated as this could be a crossfire between the 2 of them
These values I mentioned continue with momentary decrease and increase, they are not constant. Thank you very much.So are the Bank1 and Bank2 Sensor 1's alternating up and down or are they staying at .7vdc? Both sensor 1's need to be alternating between roughly .1 vdc and .9 vdc. The voltage will climb and drop steadily between those two numbers.
If one or both are staying at .7, they are bad and should be changed out.
The picture shows what I'm talking about.