No reinforcements!There looks to be a reinforcing bracket on the vertical portion of the frame. I see the black paint on it
That black is the bracket for the bumper itself
I’ve take. Better pics since off work things aren’t as bad as it seems but it visually shows where the structural integrity let go for some reason it’s mostly the last 5-8” of the bottom frame on both sides pretty much where the receiver bolts
I’m going to reinforce between upper and lower rails and weld in some steel or do something across the frame ~ hopefully keeping it from folding
The design for receivers is definitely flawed I haven’t seen any manufacturers yet that utilize the vertical sides of the truck frame
For mounting …meaning they all bolt to the bottom of the rails . How do they expect a 2” frame rail edge to not pull over time
You must be registered for see images attach
If you look at the vertical side of the frame all the way to the back, it’s level across the whole back of the truck on both sides , so this isn’t like
You must be registered for see images attach