rob249
I'm Awesome
The plastic tube that connects to the drivers side valve cover(not the PCV side) broke long ago in my 94' yukon. On my old motor, i was able to push some hose into the grommet, then push a brass hose barb into the hose to lock it in place. My new motor has a new grommet there, and its too tight to use my previous solution.
I cut the end off one of my old oil cooler lines, and was able to hammer it into that grommet. Its a very tight fit, and is roughly the same size as the hose barb on the TBI collar. Looks OEM too.
Hopefully this helps someone trying to find a fix for that stupid plastic tube.
I cut the end off one of my old oil cooler lines, and was able to hammer it into that grommet. Its a very tight fit, and is roughly the same size as the hose barb on the TBI collar. Looks OEM too.
Hopefully this helps someone trying to find a fix for that stupid plastic tube.
You must be registered for see images attach
You must be registered for see images attach