Do i need control arms for 3 inch keys

[BlackedoutBandit]

I replaced the front clip in my 2000 k2500. I decided to level it and do some other things. But my problem is the upper arms arent long enough. Boight control arms 4 times. Still arent right. Everything is new. But no one offers upper arms for a 3 inch lift. Im at a loss. Im 4.5 months and about 5k into this build. Its done other than this problem.

You must be registered for see images attach

 

[KansasOBS]

Holy geez, that is way too much crank. Just save a little more and put a RC lift on it. Angles are bad even if you found longer arms, and you're going to eat CV boots.

 

[PAIRA90S]

I put the Rough Country 3" lift upper arms on mine right after i got it plus the NAPA(Moog) 2644377 caster/camber kit. The UCA's
helped the ball joint angle somewhat & the caster/camber kit gave me full adjustment. It's a shame I now want to lower it a bit.

 

[Sean Buick 76]

It’s way too cranked, lower it about 2” or switch to a proper lift kit.